This water-based stripping/cleaning agent is ideal for washing anilox rollers, gravure cylinder, and inking rollers. One unique feature of the agent is that it physically strips the grime by penetrating the adhesion interface between the grime and the substrate instead of chemically dissolving or corroding the grime.
-Can also clean tough grime, including hardened ink and water-based varnish
-Can be used on all materials, including steel, aluminum, ceramic, and rubber
-Achieves a powerful cleaning effect even with a small amount of agent
-Releases almost no waste fluid, making it a convenient cleaning fluid
-The agent is biodegradable and is extremely safe on skin

Made of high-grade steel, the Long-Life Razor Blade contains few impurities and consists of a uniform microstructure, which minimizes chipping of the blade edge and provides durability. An advanced coating applied to the entire blade gives the blade ultra-hardness, adhesion, and slipperiness, which provides the blade edge with excellent wear resistance.

Coating Razor Blade
This long-life slitter razor blade is optimal for slitting films and adhesive tapes, etc. We have a variety of models for different machines.

Coating Cutter Blade
This cutter can be mounted in commercially available cutter holders. The blade has a higher durability than commonly used cutters, and is easier to replace. We also offer a creaseless type that is effective in preventing contamination.

We also offer the following models.
Creaseless Cutter Blade
This blade does not have a crease, as found in standard cutter blades, so eliminates one cause of contamination.

Ultra-hard Blade
This regrindable carbide alloy blade has a longer usage-life than standard steel blades.

グラビア印刷用のFS撹拌棒です。アルミニウム製なので軽量で回転性に優れており洗浄も簡単。丈夫で長時間ご使用いただけます。また直接シリンダーに接触するのを防ぐ保護リングも取り付け可能です。

●長さ
200～2,600mm
●外径
50mm（標準品）、33mm
●磁石
左右に内蔵（作成時に位置の移動可能）
磁石大：磁力が強く高粘度のインキに最適
磁石中：一般的なグラビアインキに最適（標準品）
磁石小：シリンダーの長さが短いものに最適
●リブ高さ
1.4mm
●リブピッチ
50φ：56mm（標準品）、32mm
33φ：52mm（標準品）、32mm
●リブの巻方向
両方向タイプ、右下方向タイプ、左下方向タイプ、リブ無しタイプ

For users of conventional viscosity controllers who feel there are often glitches despite using these devices, who feel it is a pain to clean these devices, and who feel the precision and stability is poor, we can solve all of these problems by equipping our viscosity controllers with TURBO WASH and our SMART OIL INJECTION SYSTEM (patent pending). These overcome all of the common glitches, washing burden, and precision problems.
-Improved Quality
Improves the quality of gravure printing, flexo printing, laminating, and coating, as well as reduces printing defects such as color variation and doctor streaks
-Lowered Costs
Reduces the consumption volume of inks and adhesives by at least 15%
-Labor Saving
Reduces the amount of manual labor by mechanizing difficult, time consuming work
-Digitalized Data
Digitalizes data on viscosity variation, which can then be downloaded to a PC to further improve quality
-High-durability
Many of the components, including the diaphragm pump and electromagnetic valve, have been modified to realize a higher durability

【Steel Doctor Hi-Blade^® Series】
Produced under the strictest quality management conditions for everything from materials to grinding and inspection, our many years of experience and know-how are brought together in our Steel Doctor Hi-Blade Series.

Doctor Hi-Blade^®
Produced by our craftsmen using our in-house developed precision grinders, the Doctor Hi-Blade is our standard model and has been lovingly used for many years by our customers. The blade edge is uniquely ground based on our many years of experience and know-how.

Gold Doctor Hi-Blade
This model is produced with the latest high-grade steel, which contains greater amounts of wear-resistant components than standard Swedish steel. The durability is extremely high, and the blade hugs the plate uniformly across the width.

Doctor Hi-Blade R-ST
Our highest grade model, the edge of this blade is formed using a special grinding process unique to our company. The blade is extremely effective in eliminating streaks found in half tone sections.

Stainless Steel Doctor/Stainless Steel Doctor XP
Using a special alloy of Swedish stainless steel, the blade has high durability and corrosion resistance. It is also suited to severe printing conditions where water and acid are used.

Benton Doctor
This blade is given an edge using a unique grinding method not found at other companies. Typically, a whetstone is used to grind the blade edge, but Benton Graphics Inc. uses a chemical treatment (corrosion method) to form the edge. As such, the ground area is extremely smooth, and there is only a minimal amount of variation and roughness.

Back-Up Doctor Blade
This is an important item that allows our Doctor Hi-Blades to be used more effectively. The Back-Up Doctor Blade can be applied to various doctor sizes, so please choose the size that suits your needs.

Doctor Hi-Blade^® Precision Blade
The edge of this blade precisely ground, which minimizes grinding variation and ensures the blade edge chips uniformly during use. The edge is angled where the blade contacts the cylinder. The blade is processed so that it begins to function well immediately and so that the doctor cutting performance is improved. The blade is most effective for high-precision printing, including coating.

Doctor Hi-Blade^® Flexotip
Developed as a specialized blade for flexo printing, the blade is ground through a completely unique method unlike that used for conventional blades. In doing so, we improved the doctor cutting precision and the durability.

【Ceramic Doctor Hi-Blade^® Series】
By applying a surface treatment to our Steel Doctor Hi-Blades, we developed a high-grade doctor with improved wear resistance and wiping capability. As a pioneer of long ceramic doctors, this product is packed with our years of history and credibility.

K Ceramic Doctor HQ Series
This blade was developed to reduce the printing defects, such as streaks, feathering, and catching, often encountered by our customers. As a doctor blade manufacturer, we conducted research and collected data over many years, eventually developing a doctor blade that is able to effectively mitigate such printing defects.
This series is made of the highest-grade Swedish steel hand-picked by our staff and the edge is ground using our unique high-precision grinding process. We also improved the areas of ceramic surface coating to strengthen the adhesion between the steel and ceramic coating.
The synergistic effect of our unique high-precision grinding process and improved coating allows the blade edge to rapidly conform to the cylinder surface, improves the doctor cut, and ensures the edge chips finely and uniformly. The fine chipping of the edge increases the useable life of the blade.

K Ceramic Doctor
This is our most highly recommended doctor blade, developed through a fusion of our unique grinding and surface treatment technologies. Compared with our conventional blades, the coating adhesion and wear resistance are greatly improved. Our many years of know-how are found through this model.

Roots Doctor
By adopting a component with good lubrication for the surface coating, this model ensures good sliding and doctor cutting. It is particularly suited for use with water-based inks. We also offer a special white color type.

Soft Doctor Hi-Blade
This model has a thinner surface coating for a lower hardness that is still able to provide wear resistance. This blade is able to reduce damage to the plate.

Pure Alloy Doctor Blade
This model is made with a special nickel alloy coating. The surface hardness is low but offers high corrosion resistance.

【Plastic Docto^®r Blade Series】
We have continued to develop soft doctor blades suited to all types of printing and coating. We offer select items that have been tested repeatedly in terms of material strength, adhesion, thickness, hardness, geometry, and cost.

PET-S, PET-D Series
Hi-PET Series
Hi-PE Series
Hi-POM Series