269 results found

Film Forming Line Rewinder

Film Forming Line Rewinder

Production Results:
Film Thickness: 1 to 350 μm
Film Width: 8,400 mm (max.)
Speed: 500 m/min (max.)

Hyper-bending Contact Roll
The ideal nip is realized by adjusting deflection caused by the weight of the roll and adjusting surface-pressure bending, which allows for winding of high-quality products.

Charging Device and Belt Wrapper
A wrapping system and charging device allow thick films to be wound on a new core without problem.

Film Pass Nip Roll System
This system provides the optimal film pass for stably transporting the film from the takeup system to the winder. The system is equipped with a nip roll.


Contact Information:
2-1-1 Mitojima, Fuji, Shizuoka 416-0921 Japan
TEL.+81-545-61-2406  FAX.+81-545-63-4570
Email:
URL:http://www.kobayashieng.co.jp/

Sales Office:

Products:
Paper Making Machines and Related Equipment; Industrial Machines for Film, Paper, and Metal; Coating/Laminating Machines; Slitting/Rewinding Machines; and Sheeting/Blanking Machines

To request detailed materials on the above product, please click the contact button below.
 

KWZ-T-13FGQS Inspection System Integrated Rewinder

KWZ

Characteristics:
Next generation, reduced space, integrated inspection system for those who want to “Effectively Use Space!”
(1) Being 30% smaller than conventional machines, this system improves operability and visibility
(2) Higher precision tension control
-By adopting a fully digital, high-speed control mechanism, the system realizes a control performance with 10 times the effectiveness of conventional models.
-By adopting multi-point tension control as the standard, rewinding quality is further improved
(3) Hydraulic proportional control for the unwinding/rewinding arm allows for contact rewinding

Specifications:
Substrates: simple/laminated films
Substrate Width: 400 to 1,200 mm
Substrate Thickness: 20 to 120 μm
Roll Length: 1,300 mm
Unwinding Diameter: Max. 800 mm
Rewinding Diameter: Max. 800 mm
Roll Weight: Max. 500 kg
Cores: 3-inch paper tube for unwinding and rewinding (75.5 mm diameter)
Machine Speed: Max. 300 m/min (standard inspection speed 150 m/min)
Tension: 40 to 250 N/total width (200 N for a 600 mm diameter)


Contact Information:
3-1 Noguchi, Ogaki, Gifu 503-0985 Japan
TEL.+81-584-91-9111  FAX.+81-584-91-9106
Email:sales1@cstoshin.co.jp
URL:http://www.cstoshin.co.jp/

Sales Office:
Tokyo Branch
Daiichi Denken Bldg. 6F, 2-7-12 Uchikanda, Chiyoda-ku, Tokyo 101-0047 Japan
Tel: +81-3-3258-9111

Products:
Slitter/Rewinders, Doctor Machines, Laminators

To request detailed materials on the above product, please click the contact button below.
 

FL-2 Series Dry Laminator

ドライラミネーター FL-2 SERIES

Characteristics:
This dry laminator comes equipped standard with our chamber doctor and lossless winding unit. By combining various material loss reducing technologies, the latest of our coating and laminating machines is easy to use while realizing high operational rates.

Specifications:
Printed Matter: plastic film, paper, other flexible material
Printed Matter Width: 1,050/1,150/1,250
Machine Speed: 180 m/min
Unwinding Diameter: 600 mm
Rewinding Diameter: 800 mm
Coating Method: direct gravure


Contact Information:
2-3-17 Mokage, Fuchu-cho, Aki-gun, Hiroshima 735-0029 Japan
TEL.+81-82-281-3281  FAX.+81-82-288-4911
Email:
URL:http://www.fujikikai.co.jp/

Sales Office:
Tokyo Branch
3-7-10 Shiratori, Katsushika-ku, Tokyo 125-0063 Japan
Tel: +81-3-3603-4181 Fax: +81-3-3603-4672
Osaka Business Office
4-13-24 Nishinakajima, Yodogawa-ku, Osaka 532-0011 Japan
Tel: +81-6-6305-3529 Fax: +81-6-6305-4855
Branch Plants Hachihonmatsu Plant
2-7-1 Iida, Hachihonmatsu, Higashihiroshima, Hiroshima 739-0146 Japan
Tel: +81-824-28-2451 Fax:+81-824-28-6824

Products:
Gravure Printing Machines, Dry Laminators, Coaters

To request detailed materials on the above product, please click the contact button below.
 

Clean Coater

クリーンコーター

Characteristics:
Clean level 100 or 1,000.
Equipped with our unique film processing equipment manufacturing knowhow developed over our long history in the field.

Specifications:
Applicable Substrates: polyimide, PET, copper foil
Coating Width: 1,000 to 1,600 mm
Machine Speed: 20 to 150 m/min

Other:
Polyimide/PET/Copper Foil Coater, Aluminum Coater, Ultra-thin Film Coater, Micro Chamber Coater

*Confirm your application on our test machines.


Contact Information:
2-3-17 Mokage, Fuchu-cho, Aki-gun, Hiroshima 735-0029 Japan
TEL.+81-82-281-3281  FAX.+81-82-288-4911
Email:
URL:http://www.fujikikai.co.jp/

Sales Office:
Tokyo Branch
3-7-10 Shiratori, Katsushika-ku, Tokyo 125-0063 Japan
Tel: +81-3-3603-4181 Fax: +81-3-3603-4672
Osaka Business Office
4-13-24 Nishinakajima, Yodogawa-ku, Osaka 532-0011 Japan
Tel: +81-6-6305-3529 Fax: +81-6-6305-4855
Branch Plants Hachihonmatsu Plant
2-7-1 Iida, Hachihonmatsu, Higashihiroshima, Hiroshima 739-0146 Japan
Tel: +81-824-28-2451 Fax:+81-824-28-6824

Products:
Gravure Printing Machines, Dry Laminators, Coaters

To request detailed materials on the above product, please click the contact button below.
 

C7-130 Separator Coater (equipped with MCD)

C7-130 セパレータ用コーター(MCD搭載)

Applications:
Coating of alumina slurry on wet or dry separator material for lithium-ion batteries.

Specifications:
-Machine Speed: 150 m/min
-Coating Speed: 100 m/min
-Substrate Width: 1,200 mm (max.)
-Unwinding/Rewinding Unit: 2-arm turret with automatic splicing
-Coating Unit: MCD coating method
-Drying Unit: 3,600 mm × 3 zones
-Installation Dimensions: length 14,600 mm, width 6,300 mm, height 4,700 mm

Installations:
Delivered to major Japanese and Chinese separator manufacturers.
For detailed specifications, feel free to contact us.


Contact Information:
2-3-17 Mokage, Fuchu-cho, Aki-gun, Hiroshima 735-0029 Japan
TEL.+81-82-281-3281  FAX.+81-82-288-4911
Email:
URL:http://www.fujikikai.co.jp/

Sales Office:
Tokyo Branch
3-7-10 Shiratori, Katsushika-ku, Tokyo 125-0063 Japan
Tel: +81-3-3603-4181 Fax: +81-3-3603-4672
Osaka Business Office
4-13-24 Nishinakajima, Yodogawa-ku, Osaka 532-0011 Japan
Tel: +81-6-6305-3529 Fax: +81-6-6305-4855
Branch Plants Hachihonmatsu Plant
2-7-1 Iida, Hachihonmatsu, Higashihiroshima, Hiroshima 739-0146 Japan
Tel: +81-824-28-2451 Fax:+81-824-28-6824

Products:
Gravure Printing Machines, Dry Laminators, Coaters

To request detailed materials on the above product, please click the contact button below.
 

MD Series Multi-drive Rotogravure Printing Machine

マルチドライブ型グラビア輪転印刷機 MD SERIES

Characteristics:
AC servo motor direct drive
The machine allows for precision cylinder phase control because it does not use a timing belt or reduction gear. The source of the printing cylinder phase is the motor source. The MD machine does not require an initial register bar and laser pointer, either. As such, printing can begin immediately once the printing cylinders are set.

Consistent Registration Precision
Equipped with the latest tension and color control, the machine maintains consistent registration precision even with conventional printing cylinders. When aiming for high registration precision (within ±0.05 mm), we suggest the necessary conditions, such as printing cylinder precision.

Significantly Reduced Loss
The result of the high-functional operations management system reduces loss to within a few meters. Therefore, the product rate is nearly 100%, significantly reducing waste paper.

High Operational Rate
Utilizing blank printing, free units, and an operational control system, operational rates are greatly increased, making it ideal for short runs.

Water-based Gravure Printing, Process Printing
By changing out the dryer and doctor, for example, the system can be used for water-based gravure printing and process printing.


Contact Information:
2-3-17 Mokage, Fuchu-cho, Aki-gun, Hiroshima 735-0029 Japan
TEL.+81-82-281-3281  FAX.+81-82-288-4911
Email:
URL:http://www.fujikikai.co.jp/

Sales Office:
Tokyo Branch
3-7-10 Shiratori, Katsushika-ku, Tokyo 125-0063 Japan
Tel: +81-3-3603-4181 Fax: +81-3-3603-4672
Osaka Business Office
4-13-24 Nishinakajima, Yodogawa-ku, Osaka 532-0011 Japan
Tel: +81-6-6305-3529 Fax: +81-6-6305-4855
Branch Plants Hachihonmatsu Plant
2-7-1 Iida, Hachihonmatsu, Higashihiroshima, Hiroshima 739-0146 Japan
Tel: +81-824-28-2451 Fax:+81-824-28-6824

Products:
Gravure Printing Machines, Dry Laminators, Coaters

To request detailed materials on the above product, please click the contact button below.
 

Dryers

乾燥装置

The quality of a coating product requires high-quality coating resulting from a high-precision coating head. At the same time, quality also relies on the stability and efficiency of the curing process, in other words the post-coating drying process. For this reason, we consider the drying process critical to the determination of coating quality.
Therefore, in aiming for higher quality, it is necessary to appropriately select the drying system functions and methods.
Based on the “heat and air” technology we have accumulated since our founding, we offer different drying technologies, including roll-supported and floating dryers, of which we have sold many units.
Moreover, a clean environment has become an essential factor in drying high-quality coating products, so by thoroughly controlling the drying environment, we have aimed to improve the performance of our clean dryers, which have been well accepted in various industries. We also manufacture inert drying units for when drying under low oxygen conditions is required. We hope you make use of these.


Contact Information:
101-1 Kawai, Kawai-cho, Kitakatsuragi-gun, Nara 636-0051 Japan
TEL.+81-745-57-0685  FAX.+81-745-57-1075
Email:
URL:http://www.hirano-tec.co.jp/

Sales Office:
Tokyo Branch
Hulic Kanda Bldg. 3rd floor, 1-16 Kandasudacho, Chiyoda-ku 101-0041 Tokyo, Japan
TEL: +81-3-5289-8834 FAX: +81-3-3251-7999

Products:
Coaters, Laminators, Impregnation Machinery, Dryers

To request detailed materials on the above product, please click the contact button below.
 

Intermittent Stripe Coater for Electrode Plates

電極板用 間欠・ストライプコーター

The demand for lithium-ion batteries, including those for automobiles and stationary applications, is expanding. We have sold more than 250 lithium-ion electrode coaters, and manufacture and supply equipment that can handle the high-precision, high-speed coating demands required to meet the needs of the market. Our intermittent coating systems, required for electrode coaters, can be equipped with comma type coating heads for test and pilot lines that coat small volumes, as well as die coating heads designed for high-volume production. Our dedicated intermittent coating system realizes high-precision, high-speed, stable coating in intermittent die coating. We also have an electrode coater pilot line at our Technicum facility, which allows for pattern coating tests, including intermittent and stripe coating. As such, we hope you coat and evaluate your electrode slurries. Applications: Battery electrode coating (lithium-ion batteries, super capacitors, etc.) Specifications: Machine Speed: 30 to 100 m/min Roller Width: 400 to 1,500 mm


Contact Information:
101-1 Kawai, Kawai-cho, Kitakatsuragi-gun, Nara 636-0051 Japan
TEL.+81-745-57-0685  FAX.+81-745-57-1075
Email:
URL:http://www.hirano-tec.co.jp/

Sales Office:
Tokyo Branch
Hulic Kanda Bldg. 3rd floor, 1-16 Kandasudacho, Chiyoda-ku 101-0041 Tokyo, Japan
TEL: +81-3-5289-8834 FAX: +81-3-3251-7999

Products:
Coaters, Laminators, Impregnation Machinery, Dryers

To request detailed materials on the above product, please click the contact button below.
 

Unit Change Multicoater "M-200L"

ユニットチェンジ型マルチコーター「M-200L」

Developed based on our experience and technology accumulated through large-scale production machines, the Multicoated Series is a small, continuous coating machine. It is designed to evaluate coatings and products using a variety of coating methods, but also has a small-scale production function aimed at scaling up production to production machines, short-run production, and prototype production, for which it has been highly accepted. This series has already received several hundred orders since its development, but we also offer customized models to meet customer needs. Moreover, the coating unit is designed to be modular so that it can handle all coating methods. In fact, we have installed a Multicoater with this mechanism in our Technical test facility. In this way, we offer this machine as a development and production line for high-precision, high-value oriented products.

Applications:
Optical functional film, battery electrodes, combines adhesives, combines materials (FCCL, etc.), medical, photosensitive film, energy related (secondary batteries, fuel cells, etc.), automobile components related, and architectural material related

Specifications:
-Roll Width: 400 mm
-Machine Speed: 1 to 40 m/min
-Drying Speed: 60 to 180ºC
-Drying Length: 1.5 m/chamber × 3 chambers


Contact Information:
101-1 Kawai, Kawai-cho, Kitakatsuragi-gun, Nara 636-0051 Japan
TEL.+81-745-57-0685  FAX.+81-745-57-1075
Email:
URL:http://www.hirano-tec.co.jp/

Sales Office:
Tokyo Branch
Hulic Kanda Bldg. 3rd floor, 1-16 Kandasudacho, Chiyoda-ku 101-0041 Tokyo, Japan
TEL: +81-3-5289-8834 FAX: +81-3-3251-7999

Products:
Coaters, Laminators, Impregnation Machinery, Dryers

To request detailed materials on the above product, please click the contact button below.
 

Supply Type Doctor Blade Gravure Coater

給液式ドクターブレード付きグラビアコーター

The “Supply Type Doctor Blade Gravure Coater” is based on our gravure coating technology and reduced problems with open-type systems.
This machine uses a semi-sealed system that reduces solvent vaporization, which reduces changes in coating fluid viscosity and concentration and allowing for stable coating.
Chamber type machines, in particular, reduce the generation of foam resulting from high-speed coating to achieve a consistent coating film.
In addition, opening the chamber doctor eases the cleaning of the chamber and maintenance of the doctor blade.

Applications:
Silicone coatings, adhesive coatings, inks, anchor coatings, etc.

Specifications:
Working Roll Width: Max.2,500 mm
Machine Speed: Max.300 m/min


Contact Information:
101-1 Kawai, Kawai-cho, Kitakatsuragi-gun, Nara 636-0051 Japan
TEL.+81-745-57-0685  FAX.+81-745-57-1075
Email:
URL:http://www.hirano-tec.co.jp/

Sales Office:
Tokyo Branch
Hulic Kanda Bldg. 3rd floor, 1-16 Kandasudacho, Chiyoda-ku 101-0041 Tokyo, Japan
TEL: +81-3-5289-8834 FAX: +81-3-3251-7999

Products:
Coaters, Laminators, Impregnation Machinery, Dryers

To request detailed materials on the above product, please click the contact button below.
 

Return Top