269 results found

Sealed Deckle Bar T-die

シールディッケルバー付きTダイ

Characteristics:
-Compared to standard deckle bars, the seal property is greatly improved and there is no edge sagging and beading
-When changing the width, the sealed deckle can be moved to allow the angled surface of the lip to be cleaned
-The sealed deckle bar has a higher strength and durability than the standard deckle bar
-The entire surface of the main body and lip are ground
-The inside of the manifold is given a mirror finish
-High thickness precision
-Purge is simple and fast (built-in resin removal plug)
-Simple structure, excellent operability, high durability

Applications:
Extrusion lamination

Specifications:
-T-die Width: 1,000 to 4,300 mm
-Options: electronic width control


Contact Information:
2676-1 Nishikata, Koshigaya, Saitama 343-0822 Japan
TEL.+81-489-89-6317  FAX.+81-489-89-6306
Email:
URL:http://www.jyohoku-tdie.co.jp/en/

Sales Office:

Products:
Extrusion Laminator T-dies, Adapters/Connectors, T-die Overhaul, Coating Dies

To request detailed materials on the above product, please click the contact button below.
 

軟包装用水性インクジェットプリンター「FXIJ」

fxij

class=“qtranxs-available-languages-message qtranxs-available-languages-message-en”>Sorry, this entry is only available in class=“qtranxs-available-language-link qtranxs-available-language-link-ja” title=”日本語”>Japanese.


Contact Information:
1201-11 Takada, Kashiwa, Chiba 277-8525 Japan
TEL.+81-4-7143-6760  FAX.+81-4-7146-0566
Email:
URL:http://www.think-lab.com/

Sales Office:

Products:
Gravure Cylinder making System

To request detailed materials on the above product, please click the contact button below.
 

全自動レーザーグラビア製版システム「New FX3」

fx3

class=“qtranxs-available-languages-message qtranxs-available-languages-message-en”>Sorry, this entry is only available in class=“qtranxs-available-language-link qtranxs-available-language-link-ja” title=”日本語”>Japanese.


Contact Information:
1201-11 Takada, Kashiwa, Chiba 277-8525 Japan
TEL.+81-4-7143-6760  FAX.+81-4-7146-0566
Email:
URL:http://www.think-lab.com/

Sales Office:

Products:
Gravure Cylinder making System

To request detailed materials on the above product, please click the contact button below.
 

Automated Paper Polishing System for Gravure Cylinders

グラビア用自動ペーパー研磨装置

Our highly awaited off-line, all-purpose automated paper polishing system is now available

-Handles face lengths of 200 to 1,300 mm and diameters of 100 to 300 mm
-Polishing conditions can be set as desired
-Automatically measures face length and diameter after pressing the start button for easy operations
-Detailed conditions can be input to produce the desired polishing pattern
-Can handle both wet and dry polishing
-Polishing time takes 3 to 10 minutes per standard size cylinder
-Large, heavy cylinders are easily handled using a mounting system, which comes standard
-A simple paper setting and removal mechanism allows for easy paper exchange
-Can be conveniently used for pre-process cleaning


Contact Information:
1201-11 Takada, Kashiwa, Chiba 277-8525 Japan
TEL.+81-4-7143-6760  FAX.+81-4-7146-0566
Email:
URL:http://www.think-lab.com/

Sales Office:

Products:
Gravure Cylinder making System

To request detailed materials on the above product, please click the contact button below.
 

DYNO-MILL Type Research Lab

ダイノーミル リサーチラボ型

This new machine, which is able to use microbeads of 0.05-1.0 mm in diameter, is aimed at research and development using samples as small as 100 cc. The agitator uses an accelerator that effectively and uniformly transfers energy to the beads. One feature of this machine is the integrated feed screw, which supplies the material to be dispersed and allows for pumpless self-circulation operations. Moreover, the grinding chamber has a structure that allows it to be easily removed from the motor drive, allowing for easy bead filling, disassembling for cleaning, and reassembly.

-Cylinder Volume: 80 cc
-Usable Beads: 0.05 to 1.0 mm diameter
-Minimum Sample Volume: 100 cc
-Peripheral Speed 4 to 15 m/sec
-Separator: Screen separator


Contact Information:
Hotel Agora Regency Sakai 10F, 4-45-1 Ebisujimacho, Sakai-ku, Sakai, Osaka 590-0985 Japan
TEL.+81-72-228-1101  FAX.+81-72-227-1498
Email:sec@shinmaru-e.com
URL:http://www.shinmaru-e.com/

Sales Office:
Tokyo Sales Office
3-17-10-103 Shiba, Minato-ku, Tokyo 105-0014 Japan
Tel: +81-3-3453-7280 Fax: +81-3-3798-1924

Products:
Wet Type Dispersion/Grinding Machine, Mixers, Agitators

To request detailed materials on the above product, please click the contact button below.
 

DYNO-MILL Type NPM

ダイノーミル NPM型

Using a newly developed centrifuge separator, this new machine allows for the use of microbeads of 0.03 to 0.2 mm in diameter. The centrifuge separator has an independent drive, for which the revolutions can be set independently from the agitator speed to achieve a stable flow for materials ranging from low to high viscosity. In addition, the agitator uses the same accelerator as the ECM type, so allows for efficient, uniform energy transfer to the beads. Nanomaterial dispersion does not require a strong impact force; rather, applying a strong impact force to the primary particles would cause problems with co-agglomeration because the surface energy of the particles increases when they are destroyed. By using microbeads, it is possible to effectively disperse the nanomaterials without having to grind the raw material particles.


Contact Information:
Hotel Agora Regency Sakai 10F, 4-45-1 Ebisujimacho, Sakai-ku, Sakai, Osaka 590-0985 Japan
TEL.+81-72-228-1101  FAX.+81-72-227-1498
Email:sec@shinmaru-e.com
URL:http://www.shinmaru-e.com/

Sales Office:
Tokyo Sales Office
3-17-10-103 Shiba, Minato-ku, Tokyo 105-0014 Japan
Tel: +81-3-3453-7280 Fax: +81-3-3798-1924

Products:
Wet Type Dispersion/Grinding Machine, Mixers, Agitators

To request detailed materials on the above product, please click the contact button below.
 

Specialized DD Control System for Coaters

コンペンレンス制御システム

Characteristics:
Handles advanced and precision thin-film coating
DD unit characteristics
-Low-cogging motor
-Low-wripple motor drive control
-High-resolution speed control (20 bit)
-Explosion proof tested (EXD II BT4)
System control technology
-“DD System MX” fully synchronized control from infeed to outfeed


Contact Information:
2-1-1 Osaki, Shinagawa-ku, Tokyo 141-6025 Japan
TEL.+81-3-6737-2532  FAX.+81-3-6866-5118
Email:
URL:http://www.shi-mechatronics.jp/en/

Sales Office:

Products:
Drive Control System

To request detailed materials on the above product, please click the contact button below.
 

Compensator-less Control System

コンペンレス

Characteristics:
-The control keywords are “printing machine modeling” and “non-interference”
-Our proprietary technology will change your gravure printing machine
-Using a compensator-less control system, the system reduces paper loss
-Sectional control for gravure printing machines


Contact Information:
2-1-1 Osaki, Shinagawa-ku, Tokyo 141-6025 Japan
TEL.+81-3-6737-2532  FAX.+81-3-6866-5118
Email:
URL:http://www.shi-mechatronics.jp/en/

Sales Office:

Products:
Drive Control System

To request detailed materials on the above product, please click the contact button below.
 

Non-solvent laminator Compact type “LMC-SF1300”

ノンソルベントラミネータコンパクトタイプLMC-SF1300

<Features>
・Operation considerable design, Operator work burden reduction by an automatic control system
・Safety considerable design at operating
・Possible for uniform processing on a substrate by thickness measurement system (option)

<Specifications>
Machine speed: 400m/min
Substrate width: Max 1300mm
No1, No2 unwinding one axis type diameter: Max φ800mm (Shaftless chucking)
Winding diameter: Max φ1000mm
Coating type: 5 rolls
Tension: 30-300N

Turret type (LM-SF1300T), Dry/non-solvent dual purpose type (LM-Combi-800S) are available.


Contact Information:
30-6 Tanno, Togane, Chiba 283-0824 Japan
TEL.+81-475-55-2135  FAX.+81-475-53-1400
Email:sobu@maple.ocn.ne.jp
URL:http://www.sobukikai.co.jp/

Sales Office:

Products:
Gravure Printing Machines, Flexo Printing Machines, Dry Laminators, Coaters, Other Automated Labor Saving Machinery

To request detailed materials on the above product, please click the contact button below.
 

SGX Series Follow-up Gravure Printing Press

追い刷グラビア印刷機 SGXシリーズ

Characteristics:
-Reduces operator workload via an automatic control system and a design that considers operability. The design also fully considers safety during operations.
-Comes equipped with a high-precision compensatorless sectional drive system for follow-up printing. Using a sensor attached to the inside of the device, the machine adjusts to pitch error in existing printed matter for high-precision follow-up printing.
-Realizes fully automated high-precision splicing for follow-up printing that matches with existing printed matter.

Specifications:
Substrates: various plastic films, paper
Maximum Machine Speed: 220 m/min
Substrate Width: 900, 1,000, 1,100, 1,200, 1,300 mm
Original Roll Diameter: 600 mm
Original Roll Support: shaftless
Splicing: fully automated high-precision splicing for follow-up printing
Tension Control: Automated AC vector inverter motor control
Registration Control: compensatorless sectional drive system, automatic vertical/horizontal registration control (initial positioning system)
Drying Method: quick return method
Drying Heat Source: LPG gas, steam, electric heating, etc.
Other specifications designed to meet customer needs


Contact Information:
30-6 Tanno, Togane, Chiba 283-0824 Japan
TEL.+81-475-55-2135  FAX.+81-475-53-1400
Email:sobu@maple.ocn.ne.jp
URL:http://www.sobukikai.co.jp/

Sales Office:

Products:
Gravure Printing Machines, Flexo Printing Machines, Dry Laminators, Coaters, Other Automated Labor Saving Machinery

To request detailed materials on the above product, please click the contact button below.
 

Return Top